Tire Manufacturing Equipment

Factory-direct PCR and semi-steel radial tire production equipment, from bead and carcass processing through building and finishing.

Our Equipment Range

Builds a complete PCR green tire on one machine — innerliner, sidewall, carcass ply, apexed beads, two belts, cap strip and tread, for…

Perforates, cuts, splices and winds fiber cord fabric into finished carcass ply — 90° cut, ±0.5 mm on width and ±0.1° on angle, at 22 cuts…

A matched first-stage and second-stage machine set for 16"–22" PCR radial tires: the first stage builds the carcass, the second shapes it…

Joins extruded triangular apex to steel bead cores automatically — bead loading, profile cooling, apex applying and unloading all run…

Winds six PCR bead cores per cycle straight from bare wire — let-off, preheating, rubber coating, cooling, accumulation and traverse…

Grinds the white sidewall band on cured tires from 12" to 20" — servo wheel positioning, 80- and 180-grit two-stage grinding, and ducted…

Slits calendered cord fabric into 10–25 mm cap strip and winds it linerless onto 16 or 24 stations at up to 50 m/min, holding ±0.5 mm on…